Home > Fish > Hardware > Deicers

Pond Heaters and De-icers

Pond de-icers are used to keep a hole in the top of the pond during the winter to allow gas exchange. Without this hole, noxious gas could build up, killing the pond inhabitants.



Sort By:
Page of 1
Allied TCO Temperature Controlled Outlet LockNDry Outdoor Extension Cord Thermo-Pond 3.0 Pond Deicer
TCO - Temperature Controlled Outlet
Our Price: $33.99
Sale Price: $19.99
Savings: $14.00
K&H Thermopond 3.0
Our Price: $45.99
Sale Price: $39.99
Savings: $6.00

TCO- TEMPERATURE CONTROLLED OUTLET



This item will pay for itself in about 30 days!

BUY 3 OR MORE AND SAVE $4.00 EACH


Here's how it works:

When you plug in your pond deicer or stock tank heater, it constantly uses electricity while monitoring the pond water temperature. The deicer doesn't actually go into use until the air temperature reaches 35°F.

That's where the TCO comes into play - The TCO keeps any power from going to the heater until the air temperature drops to 35°F.
It turns on power at 35°F and turns power off at 37°F. Simply plug the TCO into an outdoor outlet and plug your deicer or heater into the TCO.

The TCO can save A LOT of $$$ this winter!

Other uses: heated gutter cables, thermal bowls, heated pet beds

LOCKNDRY POWER EXTENSION CORD

Safely connect outdoor heated accessories in rain or snow!

16 gauge, 25 ft long

The revolutionary LOCKNDRY is the only detachable power supply cord approved by Underwriters Laboratories for use with heated buckets, heated pet bowls, heated bird baths, deicers, etc.. Provides a water-resistant seal while keeping the connection firmly secured. The specially designed plug on the LOCKNDRY cord fits any standard outlet, but when mated with the LOCKNDRY compatible power cord, the large black nut pulls the plug tight against the gasket to form a water-resistant seal. The red nut the locks everything in place and prevents cord separation. The LOCKNDRY is great as an all-purpose extension cord too!

Made in the USA

K&H THERMO-POND 3.0 DEICER

THERMO-POND HEATER FOR LARGER PONDS

For ponds up to 1000 gallons! The world's most energy efficient pond heater! Thermo-Pond is a unique patented pond heater that keeps a hole through the ice in backyard ponds for just pennies a day. In fact, Thermo-Pond can save up to $30.00 a month in electricity VS. those high wattage stock tank style de-icers! Just think, Thermo-Pond pays for itself in as little as 2 months. Thermo-Pond floats on top of the water and is thermostatically controlled to never get hot.

Unlike some other heaters, Thermo-Pond will never burn a pond liner or plastic pond. It naturally allows the pond to ice over while maintaining a hole through the ice. Allowing that gas exchange can help keep a healthier environment during the winter months Thermo-Pond should be used in ponds that are deep enough to allow plenty of livable water under the iced portion of the pond.

One year limited warranty.


  • The world's most successful and efficient low-wattage pond heater.
  • Thermo Pond uses only 100 Watts
  • Thermo Pond maintains a hole in backyard pond ice for just pennies a day.
  • Can save up to $30 to $50 a month in electricity compared to "stock tank" style heaters. Pond heater pays for itself in two months!
  • Floats on top of the water.
  • Thermostatically controlled never to get hot.
  • Completely safe when used with a pond liner or plastic pond.
  • Fish friendly - assists the escape of toxic gases all winter long to help maintain a toxic-free environment for fish living under the ice.
  • Tested in northern Wisconsin at temperatures of 30° below zero Fahrenheit.
  • One-year limited warranty.

Ice will typically form up to the sides of the Thermo-Pond™. It will not harm or "crush" the unit. There is water under it which allows toxic gases to vent through the hole.

Allied PTD15 Pond De-Icer K&H Perfect Climate Pond De-Icer Perfect Climate Pond Deicer
Allied Precision PTD15 1500w Pond De-Icer
Our Price: $44.99
Sale Price: $39.99
Savings: $5.00

Pond Deicer PTD15

by Allied Precision

The PDT15 1500W, 2 in 1 pond de-icer from API incorporates multiple temperature sensors to monitor water temperature as well as protect against over-temperature conditions. Traditional de-icers use one sensor to monitor both water and heater temperatures. By requiring one sensor to do double duty, the water may be heated more than necessary. With the use of multiple sensors, the PDT15 improves temperature control while keeping a space completely ice free to allow gas escape.

The sturdy, finned aluminum base spreads the heat out to make the heater cooler to the touch while putting the maximum amount of heat into the water. this heater can be safely used in smaller, plastic ponds.

The PTD15 can be converted from a floating to a sinking de-icer by simply removing the cover and float assembly and turning the unit upside down to rest on the pond bottom. Sturdy feet support the unit off the pond bottom when operating as a sinking pond de-icer.

  • Easily converts from a floating to a sinking de-icer
  • Durable aluminum base
  • Energy efficient- maintains de-icing without over heating
  • Multiple thermostat control
  • Large, finned base runs cooler than conventional de-icers
  • Safe in plastic ponds
  • 3 year warranty

K&H PERFECT CLIMATE POND DE-ICERS

CLICK ON THE PRODUCT PHOTO FOR SIZE OPTIONS

The new Perfect Climate Pond De-Icer from K&H Manufacturing has “reinvented the wheel” when it comes to keeping fresh water available in the winter. Every K&H de-icer is safe in all ponds, unlike nearly all of the other de-icers available in the market today. No expensive shrouds or cages need to be purchased either. Every one of these de-icers can be used as a floating de-icer out of the box or in seconds converts to a submersible de-icer with the click of a button! In the past, all that was readily available were energy gulping 1000 watt to 1500 watt de-icers; Customers had no choice but to purchase these expensive to run de-icers, even when they didn’t need it. They’ve solved this problem by creating a whole line of de-icers along with a convenient zone chart for consumers to choose the correct de-icer, every time! When it comes to fresh water, K&H is the choice that makes cents. Pond heater.


HEATING ELEMENT MUST BE IN THE WATER AT ALL TIMES WHEN PLUGGED IN

  • Floating or submersible all in 1 design
  • Safe in ALL ponds. No expensive bulky cages to purchase and install
  • Energy savings by choosing the correct de-icer for your application
  • 12 foot cord

K&H PERFECT CLIMATE DEICER

WITH FLOAT ATTACHMENT

This pond de-icer is designed with small ponds in mind.

The Thermo Pond Perfect Climate Submersible Pond De-Icer is designed to keep open water in ponds up to 300 gallons, 18 inches deep or less. The de-icer is thermostatically controlled and all heating elements are enclosed so they will not harm or burn your pond liner. It also has inlets molded into the design so the heater can be used in tandem with air or water pumps to increase circulation.

Thermo Pond Perfect Climate Submersible Pond De-Icer is not designed to be a submersible pond de-icer in ponds larger than 300 gallons. For larger ponds, use the float attachment to convert to a floating deicer.

The best time to install your Thermo-Pond Perfect Climate Submersible Pond De-Icer is before your pond freezes over.

  • Uses only 300 watts
  • Thermostatically controlled
  • Perfect for small or preformed ponds
  • Will not burn preformed ponds or liners
  • 12’ cord
  • Two year warranty
Allied Pond Breather
Allied Pond Breather
Our Price: $59.99

ALLIED POND BREATHER 8PB

Finally! A product specifically designed to eliminate toxic gasses from your fish pond without the energy costs and harmful
side effects of other products.

During winter, gasses from decomposing matter build up under the ice and can kill your fish if they are not allowed to escape. While other
products waste energy in heating to maintain a hole in the ice, the revolutionary Pond Breather is designed to freeze into the ice and move water
above the ice layer where gas exchange can then occur.

The Pond Breather works by moving water from the bottom of the pond to above the ice where toxic gasses can escape and oxygenation can occur. Its split chambered gas exchange chamber generates air flow past the water stream to sustain gas exchange at its highest efficiency. The water then returns to the same level of the pond with just enough heat added to replace that lost to the air.