Home > Dog > Gift Ideas > Engraved Tags and Plates > I.D. Tags > Cubic Zirconia

Engraved Dog Tags With Cubic Zirconia


Sort By:
Page of 1
Round engraved dog tag with cubic zirconia Mataza rectangular engraved tags

32mm ROUND TAG WITH CUBIC ZIRCONIA




32mm = 1 1/4" Diameter

AVAILABLE IN RHODIUM SILVER AND HIGHLY POLISHED GOLD PLATING

Rhodium: A Rare, Silvery-white hard transition metal and a member of the platinum group. Rhodium is found in platinum ores and is used in alloys with platinum as a catalyst. It is usually the most expensive precious metal.

Our Rhodium line of pendants are designed to give a better overall look to the engraving job, while giving a long lasting shine.
Rhodium will not tarnish when exposed to water or light.


TEXT: WHAT WE ENGRAVE ON THE TAG YOU ORDER
Anything you want, provided there is room, what you put in the instruction boxes is what will be on the tag. A lot of text crammed onto one side of a small tag will result in lettering that is difficult to read. Keep this in mind when requesting the text you want on the tag. We believe you will be happier with the results if you try to be brief and to the point, also consider spreading the text out over both sides of the tag, this also will allow for larger lettering. Avoid redundant and obvious wording, like 'PLEASE CALL', middle initials in your name, and putting your last name on the tag twice, once after pet name and once after your name, this is obvious and will just make the tag look bad.

Less text means the text we do engrave will be larger: If you ask for one line, just the pet name for example, the text (letter height) will be greater than if you ask for two lines, etc.


METAZA RECTANGULAR TAG WITH CUBIC ZIRCONIA






THESE ARE NOT YOUR AVERAGE ALUMINUM TAG!

Both sides can be engraved.

2"w x 1 1/8"h

TEXT: WHAT WE ENGRAVE ON THE TAG YOU ORDER
Anything you want, provided there is room, what you put in the instruction boxes is what will be on the tag. A lot of text crammed onto one side of a small tag will result in lettering that is difficult to read. Keep this in mind when requesting the text you want on the tag. We believe you will be happier with the results if you try to be brief and to the point, also consider spreading the text out over both sides of the tag, this also will allow for larger lettering. Avoid redundant and obvious wording, like 'PLEASE CALL', middle initials in your name, and putting your last name on the tag twice, once after pet name and once after your name, this is obvious and will just make the tag look bad.

Less text means the text we do engrave will be larger: If you ask for one line, just the pet name for example, the text (letter height) will be greater than if you ask for two lines, etc.

HINT: FOR A REALLY SHARP LOOKING TAG, ENGRAVE YOUR PET'S NAME VERTICALLY ON THE FRONT AND ENGRAVE ALL THE IMPORTANT INFO HORIZONTALLY ON THE BACK. (When printing vertically, only line #1 can go on the front of the tag).