OZONE GENERATORS AND CONTROLLERS

Excellent water quality can be achieved by using an ozone generator to inject ozone into the salt water aquarium by way of a protein skimmer or ozone reactor.  This injected ozone is used to react with organic compounds in the salt water aquarium resulting in less waste and water that is crystal clear.  The yellow tint, common with salt water aquariums will be completely removed.  Corals and fish will be happier also due to the increased levels of oxygen in the water.   Ozone is created by moving oxygen (O²⁾ past an ozone bulb in the ozone generator resulting in a molecule with an extra oxygen molecule (O³).   This resulting molecule is very effective in cleaning the tank water.  It can be very destructive also.  Water leaving the protein skimmer should pass through activated carbon to remove any residual ozone.

Water quality can be measured with an O.R.P. meter.  It will read the oxidation reduction potential of the tank water.  The Accu Max Ozone Controller below  reads the ORP of the water and turns on and off the ozone generator when needed. 

PUREZONE OZONE GENERATORS- The finest available!

The Purezone UV1X is definitely a well built generator. It is rated at 100mg/hr and it is our opinion that this unit is under rated. Includes unit, power cord. hose and ozone check valve     BUILT IN VOLTAGE SUPPRESSER ECONOMICALLY PRICED SMALL IN SIZE 8 " x 4" x 2" LONG BULB LIFE: EXPECTED 10,000 HOURS LOW POWER CONSUMPTION RECOMMENDED FOR TANKS UP TO 75 GALLONS

UV1X OZONE NOW ONLY $100.00 REPLACEMENT BULB NOW ONLY $50.00

The Purezone UV1X is definitely a well built generator. It is rated at 125mg/hr and it is our opinion that this unit is under rated. Includes unit, power cord. hose and ozone check valve   BUILT IN VOLTAGE SUPPRESSER ECONOMICALLY PRICED SMALL IN SIZE 12" x 4" x 2" LONG BULB LIFE: EXPECTED 10,000 HOURS LOW POWER CONSUMPTION RECOMMENDED FOR TANKS UP TO 150 GALLONS

UV5X OZONE NOW ONLY $125.00 REPLACEMENT BULB NOW ONLY $55.00

ACCUMAX OZONE CONTROLLER

The Ultralife Accu Max I single channel monitor/controllers are designed for continuous ozone injection operation without interruption. They feature a large .5 inch LED display, piggy-back relay module, recessed adjustment screws and an adjustable 'deadband'. We feel the last feature is the best feature of all. The adjustable 'deadband' (control span) allows for user adjustment to the desired control range. The Accu-Max I controllers are supplied with highly accurate custom  ORP epoxy body electrodes with 10 ft cable and BNC connector.

OZONE CONTROLLER NOW ONLY $249.99